HomeTech TutorHow To Change IMEI Of All MTK Android Devices

How To Change IMEI Of All MTK Android Devices

MTK Engineer Mode IMEI Guide | Change your IMEI on your phone without much ado, you can use any of Engineering Mode(MTK) app, Chamelephon App, Mobile Uncle Tool app or via USSD code. See know-how tips below.

- Advertisement -

MTK Engineer Mode IMEI Guide | This article contains verified methods of how to…Change TECNO Camon C9 IMEI, change TECNO Camon C7 IMEI, change TECNO Camon C5 IMEI, change TECNO Camon C8 IMEI, change TECNO L8 IMEI, change TECNO L8 Plus IMEI, change TECNO L7 IMEI, change TECNO W4 IMEI , change TECNO W5 IMEI, Change TECNO W3 IMEI, change TECNO Boom J7 IMEI, change TECNO Boom J5 IMEI, change TECNO L6 IMEI, change TECNO Phantom 5 IMEI, Change TECNO Phantom 6 IMEI, Change TECNO Phantom 6 Plus IMEI, change Infinix Note 3 IMEI, change Infinix Note 2 IMEI, change Infinix Note 2 LTE IMEI, change Infinix Hot S IMEI, change Infinix Hot 4 IMEI, change Infinix Hot 3 IMEI, change Infinix Hot 2 IMEI, change Infinix Hot Note IMEI, change Infinix Hot Note Pro IMEI, change Infinix Zero 3 IMEI, change Infinix Zero 2 IMEI, change Innjoo Max 3 IMEI, change Innjoo Fire IMEI, change Innjoo Max 2 IMEI, change Gionee IMEI, change Huawei IMEI and more.

This is a universal method of changing almost all MTK Android IMEIs. So far so good there have been four amazing methods that work fine on any device, to change IMEI on your phone that runs on Marshmallow 6.0, Lollipop 5.0 or KitKat 4.4 is very easy with this MTK Engineer Mode IMEI Guide.

You can use the Engineering Mode(MTK) app, Chamelephon App, Mobile Uncle Tool app or USSD code. If none of this works on your MTK Android device, your phone is definitely not a Mediatek processor. This article will tackle the problem of how to change IMEI of all MTK Android devices without much ado.

It has been tested and works fine on all MTK devices such as TECNO, Infinix, Huawei, Injoo, Lenovo and many other Mediatek enabled brands.

What do I benefit from changing my IMEI?

- Advertisement -

Read my article on benefits of rooting android devices if you’re still sceptical about doing this.

I’m going to highlight four(4) MTK Engineer Mode IMEI guide on how to change IMEI on Android phones.

  • Using MTK Engineering Mode (does not require root)
  • Using Chamelephon App (requires root)
  • Using Mobile Uncle Tool (requires root)
  • Using USSD code (No app, requires root)

Remember IMEI changing is illegal in some countries and as usual, this post is only for your information and I may not be responsible for any of the misuses done by you and we are not responsible by anyways.

METHOD 1: How To Change IMEI Using MTK Engineering Mode App

A unique IMEI tweaking tool, it has my favourite out of all. This app doesn’t need root access to work, simply install and tweak with ease.

Also Read:  7 Best Scrivener Alternatives for Writers (2023)

Requirements

  1. MTK Engineering mode (mtk)
  2. Blackberry IMEI (download Blackberry IMEI generator software on your Smartphone here or request for one using the comment box)

FOLLOW STEPS BELOW

Step 1

First of all, generate your 15 digit Blackberry IMEI or other IMEI you want to write/rewrite/flash/change (see how to generate blackberry IMEI)

Step 2

- Advertisement -

Download Engineering Mode (MTK) from Google play store here.

Step 3

Open engineering mode » Click on  Engineer Mode (MTK) » Swipe left to Connectivity » click on CDS Information » Radio Information.

Click on MTK Settings
Click on MTK Settings
Slide to connectivity, then click on CDS information.
Slide to connectivity, then click on CDS information.
Change IMEI Of All MTK Android
Click on radio information

Step 4

Click on phone 1 if you want to change your sim 1 or choose Phone 2 to change sim 2 IMEI, follow this guide:

  • For Phone 1: “AT+ EGMR=1,7,”YOUR NEW IMEI NO” (make sure you add a space in between AT+ & EGMR)
  • For Phone 2: “AT+ EGMR=1,10,”YOUR NEW IMEI NO” (make sure you add a space in between AT+ & EGMR)
Change IMEI Of All MTK Android
Select Phone 1 or 2
Change IMEI Of All MTK Android
Insert newly generated IMEI then click on “Send AT command”

Step 5

Press the “Send At Command” (You should receive a message that your ‘AT command sent)

Step 6

- Advertisement -

Reboot and dial *#06# to confirm your new IMEI.

Android Reboot Tips: Switch On & Off Airplane Mode To Reboot Without having to use the regular Reboot button on Android.

Before you proceed to the next IMEI tweaking method, Why don’t you check out these useful MTK Engineer Mode Codes for Mediatek powered devices? They are quite helpful.

METHOD 2: How To Change IMEI Using Chamelephon App

This method requires root authentication before working, in essence, you must root your phone before you can use this method.

Change IMEI on Marshmallow 6.0 via Chamelephon

If you’ve been searching for how to change IMEI on Marshmallow, then this will work great for stubborn Marshmallow 6.0 Device. Works like magic!

Requirements:

  1. Rooted Android device. (If your device isn’t rooted click here)
  2. Chamelephon App (Download here)
  3. Valid BlackBerry IMEI Number or other IMEI (Don’t know how to generate a valid Blackberry IMEI number click here)

FOLLOW STEPS BELOW

Step 1

Run and install the downloaded Chamelephon app on your device

Step 2

After installing, open the Chamelephon app, then click on Authorize root permission if asked for root access as seen below.

Change IMEI on Marshmallow 6.0 via Chamelephon
Authorise superuser permission

Step 3

The first box is for the IMEI of the sim 1 while the second box for Sim 2 but that’s if you are using a dual sim phone.

Step 4

Make sure you have prepared or generated the IMEI you wish to flash.

Note: Make sure you have generated two valid IMEI for both spaces (sim 1 & 2). This implies that, to change IMEI of sim one; you must change that of sim 2 as well, they work hand in hand.

Step 5

Change IMEI on Marshmallow 6.0 via Chamelephon
Insert IMEI and click on “Apply new IMEIs”

Now that the IMEI is ready, go ahead and insert IMEI in the spaces provided and click the “Apply New IMEI ” button below.

Step 6

Confirm the change, do this by rebooting your device (see Android rebooting tips above). Dial *#06# to view your new IMEI.

METHOD 3: How To Change IMEI Using Mobile Uncle Tool

Mobile Uncle Tool app is very similar to MTK Engineering Mode, the unique differences are that MUT requires root authorization to function. In essence, you must root your phone before you can use this method. Perfect for all Android OS excluding Marshmallow works best on older Android OS, i.e, Lollipop 5.1 below.

Also Read:  Best Sites To Download Filipino Movies and Series (2023)

Requirements:

  1. Rooted Android device. (If your device isn’t rooted click here)
  2. Mobile Uncle Tool (Download here)
  3. Valid BlackBerry IMEI Number or other IMEI (Don’t know how to generate a valid Blackberry IMEI number click here)

FOLLOW STEPS BELOW

Step 1

Root your mobile phone with any rooting app. Mobile uncle requires root access. If your device isn’t rooted click here to learn how to root your phone.

Step 2

First of all, generate your 15 digit Blackberry IMEI or other IMEI You want to flash in. (see how to generate blackberry IMEI)

Step 3

Download and install Mobile Uncle Tool. (Download here)

Step 4

Open Mobile Uncle » Click on Engineer Mode (MTK) » Swipe left to Connectivity » click on CDS Information » Radio Information

Step 5

Click on phone 1 if you want to change your sim 1 or choose Phone 2 to change sim 2 IMEI, follow this guide:

  • For Phone 1: “AT+ EGMR=1,7,”YOUR NEW IMEI NO” (make sure you add a space in between AT+ & EGMR)
  • For Phone 2: “AT+ EGMR=1,10,”YOUR NEW IMEI NO” (make sure you add a space in between AT+ & EGMR)

Step 6

Press the “Send At Command” (You should receive a message that your “AT command mSent”)

Step 7

Reboot and dial *#06# to confirm your new IMEI. (See rebooting tips above)

METHOD 4: How To Change IMEI Using USSD Code (No app involved)

Have you been looking for a less stressful method, try this… Just a line of USSD code instead of downloading and installing the Android applications used in changing IMEI. You don’t need to install any applications for it to work on your Android smartphone.

FOLLOW STEPS BELOW

Step 1

Navigate to your phone dialler and type any of the USSD code below.

  • *#7465625# or.
  • *#*#3646633#*#*

Step 2

After loading Engineer mode, Click to call pad or connectivity options.

Step 3

Locate CDS information and tap on it.

Note: If you have dual SIM, there will be two options for you, select the one which you want to go with.

Step 4

Now to change IMEI number, follow…

  • For Phone 1: “AT+ EGMR=1,7,”YOUR NEW IMEI NO” (make sure you add a space in between AT+ & EGMR)
  • For Phone 2: “AT+ EGMR=1,10,”YOUR NEW IMEI NO” (make sure you add a space in between AT+ & EGMR)

For example; AT+ EGMR=1,10,”123456789XXXXXX”

Step 5

Press the “Send At Command” (You should receive a message that your “AT command mSent”).

Step 6

Reboot phone (Turn On & Off Airplane mode)

In conclusion:

Method one to three should do the magic for you, perhaps, if you still experiencing difficulty or none of the methods worked, Share the problem using the comment box below. We shall surely respond to your queries but make sure your phone is powered by an MTK (Mediatek processor). Thanks

- Advertisement -
Viklin
Viklinhttps://naijaknowhow.net
Tech Enthusiast | Gadget Lover | Architect | Content & SEO Expert @ SEOEXPERTS.COM.NG | Inter Milan Fan ⚽. Writing history one piece at a time. You can connect with me on social media using the buttons below. Cheers!

201 COMMENTS

  1. Good afternoon. I tried following the above steps but I did not see the option “CDS information” listed under “Connectivity”. I use an itel s15

  2. I’m using infinix hot 7 pro and I can’t find cds information under connectivity, also the ussd code doesn’t work for me.
    what can I do? (I’m can’t root my phone)

  3. Hello please my phone is infinix hot5 the first method doesn’t work on my phone because I can’t find CDS information on my phone, please what should I do

  4. Good afternoon. I tried following the above steps but I did not see the option “CDS information” listed under “Connectivity”. I use an Infinix Hot 6

  5. When I click on MTK Settings I get a message Cannot find Engineering Mode App – Mediatek chip set is mandatory an stock rom must be installed.
    I have a Lenovo K3 Note, which uses Mediatek chipset, but it is not stock rom

  6. Hey Viklin, I tried (AT+EGMR=1,7,”my IMEI”) and (AT+ EGMR=1,7,”My IMEI”) And both doesn’t work
    even (AT+ EGMR=1,10,”My IMEI”) Don’t work

  7. Got the “AT command is sent: ERROR”, imei didn’t change if after AT+ is any space, if there is none – getting “This command is not allowed in UserBuild”

  8. pls kindly be of help, I can’t change my IMEI because I could not find CDS information on the MTK I downloaded for my Infinix S2, and really want to know if th plan will work for my Infinix S2 if I changed my IMEI 2 BB10 IMEI

  9. Comment: i can’t insert new imei on my Tecno W4 cus i could not find CDs information…. Please can you add me to de WhatsApp group.? 08138148872

  10. hello guys, I’m new here but I need info about how I can change my techno k7 imei. The above option not working for me. And plus add me to that group 08156257265

  11. Pls can I change the imel of itel s32 to use glo bis or if there is any other way pls let me no here is my no 07053711667 pls add me on ur WhatsApp page

  12. Pls am using infinix note 4 android 7.0 and I can’t change the imei number with this method. I know of this b4. Any way pls? And add me to your group. 07065022595. Maybe it will be better there

      • I don’t know what you are thinking but it’s bcoz of a BB sub. I used to do it when I was using infinix hot 2. But Seems it’s difficult cos am using note 4 and it’s android 7.0

          • Well. I only wanted to change it cos a SIM have some MB left on it and it expires tomorrow. Am using their bonus offer which doesn’t require changing imei. I will just forget it then. Thanks

  13. Pls, how can I Repaire my phone imei number. I am using infinix hot 4 Lte. I have tried MTK engineering mode and I can’t find the CDs information on the connectivity tab. Please I need your assistance on this. U can chat me up on whatsapp via +2348036210806

  14. Invalid imei for ZTE blade l2 and at command is failed to send error using above methods. pls help…lost imei after flashing the phone

  15. Good afternoon. I have a problem with my device. Can’t call out nor receive calls but I can browse on it. It’s telling me “invalid imei”. What should I do?

  16. hi guys, i have a problem when i open mobileuncle tool it goes blank no menu. what should i do? the phone has an invalid imei problem.

  17. I am using hot 4 lite, when I lunch the MTK engineering mode Plus, when I click on radio information, it shows a message that “my device does not support MTK chipset ” what can be done to that because I want to change the imel to black Berry imel. My phone number is 08037408006. Just give me a suggestion on wat to do.

    • I guess the chipset isn’t MTK. Right now, I can’t proffer a solution until I lay my hands on that device. However, maybe you should try the other alternatives listed in the article (requires rooting).

  18. I reset my Techno Y2, and the 2 SIM cards were not making calls due to no IMEI. I tried the MTK Engineering App, after putting my IMEI which is under the battery, a message showed my code has been msent. I reboot my phone and type *#06# but nothing!
    Please what do I do now Sir?
    (Good job with your site by the way)

  19. Hello viklin.. Pls i need your help with changing my imei… I just subscribed to a 3,5gb on airtel bb complete but ain’t working.. Pls I’m using gionee f103

    • The first you could have done was confirm if your imei was changeable. Anyway, check the status of that device to know if it’s a MediaTek device. Secondly, what error were you getting when you tried to change your imei?

  20. Pls i cnt find cds or radio information on d mtk eng mode app in my fone, wen i tied to tweak my hot running android 7.0. It say cant send command with userbuild… Need help on dis

  21. Hello Admin you are doing a great job. I have not been able to change my infinix note 3 imei. I have mtk engr mode plus but it’s giving me error. Please I need you help. This my whatsapp number 09035003580. Thanks for your quick response

  22. Did all u advised using the MTK method
    It’s keeps saying AT command is sent: ERROR
    I use a Gionee Marathon 5
    07068380425 that’s my WhatsApp no kindly help out plz

  23. Did all u advised using the MTK method
    It’s keeps saying AT command is sent: ERROE
    I use a Gionee Marathon 5
    07068380425 that’s my WhatsApp no kindly help out plz

  24. When I try to use mtk engineering mode/ plus I discovered that it doesn’t have CDS Information » Radio Information please help

    • Sorry for the late response…It’s either your phone is a clone mtk device or recovery mode (twrp) isn’t available. Let me know the name of your device.

  25. Please help i pass all these procedures, after all ie applied the changes when I reboot it shows invalid imel again and again and I have rooted my note 3 x601 please any other way to change the imel please

  26. I have done everything, followed the step. I did for my Dad thinking it will work but didn’t. It was Okay, the H+ was showing, the imei was done succesfully, the data 3gig is showing. But its not working. Pls why? Thank u.

  27. Viklin pls I need your assistance am unable to change my techno w4 Imel. It says your phone not support mtk chipset when I click on radio information. Here is my digit: 07060408910

  28. I carefully followed all the steps and I was able check for my new IMEI number it displayed well. The problem now is the phone is not browsing under that sim.

    • Please use MTK Engineering Mode to change your IMEI on Infinix note 3. If that didn’t work, I advise you check if your recovery mode is still present. Try to boot to recovery mode (volume up+power button) to be sure it hasn’t vanished. That can sometimes be the problem. Do these things and get back to me as quick as possible.

      • Yes I have the IMEI number of that phone .. But, when I open the phone, It tells me that the IMEI number isn’t correct as the phone don’t recognize the IMEI number ! .. also when I restart the mobile to open the recovery mode OR factory mode, It tells me that (rf calibiration test fail , pls reset rf) .. and I don’t know what that means !! … Please if you have any information about this subject, tell me … Thank you very much.

  29. the social pack is just limited to few aps, but the Airtel BlackBerry sub enable all aps, I want to be able to access all my aps, I can’t do that using the social pack, and in other to use the BB sub I have to change my imei to BlackBerry’s but its still not working, what do u suggest?

  30. I have done everything needed, I even changed my imei many times, the damn thing just won’t work, although I already have a social park of 200mb on the sim, would it start working after I have esxusted, the the social park? please respond ASAP.

  31. Hi viklin, thanks for what you do, I was able to change my imei on my wiko slide 2, but I dnt know if the bb sub is work, cos I still have 400 MB left from my usual Android data. And I already subscribed to the bb complete for 1k. What do I do pls.

  32. Hello. I bought a 3.5gb data on my android wiko slide 2. I just came across this which I have done everything step by step to my phone 2 but when I send the command, it’s not going through.. what’s the next step

  33. mon x-peria V16 qui n’avais plus d’imei en a maintenant et le reseau est revenu apres avoir appliquer la méthode avec mobileuncle! alors je dit un grand MERCI !!! j’aimerais avoir d’autres astuces qui pourais ausi m’aider dans mon entreprise de depannage de telephone.

    • il est heureux de savoir comment utile vous avez trouvé cet article. merci pour arrêter par Guyzotier. Je suis assez sûr que vous trouverez des conseils utiles ici sur Naijaknowhow.com, il suffit de cocher une fois en tout. Je vous remercie

  34. Please can the bbgen code still generate the blackberry 10 imei code? Please boss I am waiting for your answer pls. Thanks

  35. Thanks for all of this. It worked for SIM1 but unfortunately I still have IMEI invalid for SIM2..
    what do you think?

  36. I’ve done it, infact I got the data but its still not working on my fone…. I did all d imei settings correctly and its valid… Plss help.. Tnks

  37. i cannot thank you enough. after 2 days of bricking my phone and later finding my imei invalid i was about to buy a mew phone. thanks alot for your guide.

Hey fam, don't go without a reply!

ADVERTISE NAIJAKNOWHOW
- Advertisment -

Latest Posts

- Advertisment -
- Advertisment -